HP Part
Number |
Connects | Big
Connector |
Small
Connector |
10-pin
Keying* |
Ferrite
Bead** |
Made in | Comments |
---|---|---|---|---|---|---|---|
F1015-80002 |
(not 95LX) |
female plug |
palmtop female plug |
(palmtop) |
|
& China (on bead) |
the HP49G, it fries it! Don’t use it with the HP49G!!! |
F1016-80002 |
(not 95LX) |
(8-pin mini-DIN male round socket) |
palmtop female plug |
(palmtop) |
|
(on bead) |
the HP49G, it fries it! Don’t use it with the HP49G!!! |
5181-6643 |
cable to HP48 |
palmtop male socket |
female plug |
(palmtop) |
|
& China |
with F1015-80002 and F1016-80002 cables (see above) |
82208-80001 |
and 95LX |
female plug |
female plug |
|
|
(on DB9) |
HP48 & 95LX cable |
F1633-66001 |
to HP48 |
10-pin male socket |
female plug |
(HP49G) |
|
|
every HP49G. 2:HP logo is upside down. |
F1633-66000 or F1633-66050 |
|
female plug on both ends |
(HP49G) |
|
(on cable) |
every HP49G. 2:HP logo is upside down. |
|
F1906-66000 |
to PC |
female plug |
10-pin male socket |
(HP49G) |
|
(on cable) |
some HP49G’s. |
F1897-66000 |
or HP38 |
female plug |
10-pin female plug |
|
|
(on DB9) |
PC Connectivity Kit HP P/N F1897A |
82208-80009 |
and 95LX |
female plug |
female plug |
|
|
(on DB9) |
with ferrite bead added. |
1252-6635 |
to HP38 or 49G |
10-pin female plug |
male socket |
|
|
|
HP38, but it works with HP49G too. 2:Same as CONNE-80003. |
CONNE-80003 |
to HP38 or 49G |
10-pin female plug |
male socket |
|
|
|
HP38, but it works with HP49G too. 2:Same as 1252-6635. |
8120-6736 |
and 95LX |
female plug |
male socket |
|
|
(on bead and DB9) |
82208-80009 |
F1212-80001 |
video & datalogger |
10-pin female plug |
2:4-pin wired for communication |
|
|
(?) |
|
* “Keying” refers to the “bump” or “groove” that is intended to prevent the wrong plug from fitting into the wrong socket. There are currently three different 10-pin keyings: “NONE” (no bump or groove at all), “small” (tiny groove at the top of the HP49G serial port, or the same-sized bump on corresponding plugs), and “WIDE” (a wider bump or groove, intended for palmtop use only).
** “Ferrite bead”: the strange black lump in some cables, near the calculator end. Its only purpose is to reduce the amount of radio frequency noise emitted by the cable. If RF noise is not a problem for you, but the lump annoys you, it can be easily removed by simply crushing it with a pair of pliers. It is not electrically attached to the cable at all (it merely surrounds it) so removing it is no problem.
If you have any HP cables or adaptors not listed here, please let me know! Thanks to Richard Nelson, Ralf Fritzsch, Raymond Hellstern, Cary McCallister, Glen Kilpatrick, Kurt Vercauteren, and Robert Atkinson for submitting additional information.